Planmeca Sovereign Classic, Руководство пользователя

Страница: 80 / 298

• Single-push mode
The foot control map shows only one function for each position. The
functions are activated by pushing the knob or pedal once.
• Short & long push mode
The foot control map shows two functions for each position. One of the
functions is activated by pushing the knob or pedal briefly and the other
by pushing the knob or pedal for slightly longer.
The short and long push are indicated on the buttons on the foot
control map.
NOTE
When the functions assistant call, door open, cup fill and manual chip blow
are activated with a long push, the function is active for as long as the pedal
is pushed. When you release the pedal, the function stops.
The functions that can be programmed to the foot control and their icons are
listed below.
None Deactivate intraoral
scanner
Automatic position G
Assistant call Scan Consultation position
Rinsing position Generate model
(intraoral scanner)
Trendelenburg position
Door open Navigate up (intraoral
scanner)
Entry-Exit position
Operating light Navigate down
(intraoral scanner)
Maxilla position
Suction on/off Take image with
intraoral scanner
Mandible position
Cup fill Activate/deactivate
intraoral camera
X-ray position
Bowl rinse and cup fill Freeze / unfreeze
image (intraoral
camera)
Cleaning position
Change spray mode Save still image
(intraoral camera)
Intraoral scanner
position
Automatic chip blow
on/off
Composite mode Stream on/off (Vision)
Manual chip blow Automatic position A Capture image (Vision)
Instrument light on/off Automatic position B Recording on/off
(Vision)
Power limit on/off Automatic position C Change Solanna
operating light's light
tone
14 Foot control
70 Planmeca Sovereign Classic User's manual