Planika MONROE 900 F, Руководство по установке

Страница: 59 / 68

Copyright Planika Sp. z o.o. www.planikafires.com IG0139#02 30.07.2018 59
7.5. Checklist
Range Actions
1
General
inspection

Carry out the procedure in firing up the fireplace

Check the operation of all safety systems.

Check if the flame of the main burner burns steadily

Check if the main burner is burning evenly

Check the correct operation of all modes of the remote control.
2 Glass Control

Make sure that the glass has no cracks.

Make sure the glass fits tight to the body of the fireplace.

Check the wear of the seals. If necessary, replace the seal.

Check the degree of contamination of the glass. Clean the glass if necessary.
3 Inspection hatch
control

Check the tightness of the gas connections

Check if the inspection hatch has adequate ventilation

Check whether the connection between the controller and the receiver is not
damaged.

Check whether the gas control system components are not exposed to high
temperatures

Check if the inspection hatch is not exposed to moisture.
 Check if the connecting cables show no signs of corrosion.
4 Combustion
chamber control

Check whether the ignition electrode is not obstructed by decorative elements

Check if the ionization electrode is within the range of the main burner flame

Check whether the combustion chamber does not require cleaning.

Check if the spaces supplying air from the flue pipe system to the combustion
chamber are not obstructed. If necessary unblock those spaces.

Check whether the combustion chamber has no signs of corrosion. If
necessary, remove corrosion and cover the losses with a new coat of fireplace
paint.

Check if the main burner ignites smoothly.
5 Flue Control

Check the tightness of the concentric flue system

Check the patency of the concentric flue system.
6
Monitor of the
control devices

Make sure the receiver is not damaged.

Check if the circuits has no breakthrough

Make sure the power supply cable is not damaged

Check that the components of the control system are not exposed to
overheating.
7 Housing control

Make sure the casing of the gas insert has no cracks

Check whether the combustible elements are at a safe distance from the casing
of the fireplace.
8
Decorative
elements

Check that the decorative elements do not require cleaning

Check that the decorative elements are not in contact with the glass

Check if the decorative elements are not damaged.
8. MAINTENANCE
To make sure that the device operates properly and safely, it should be inspected and cleaned once a year
and if necessary repaired by a qualified technician who specializes in the field of gas heating and electrical