Planex FNW-9802-T Скачать руководство пользователя страница 10

Страница: 10 / 51

This chapter describes how to install the FNW-9802-T into a computer and

how to connect a network cable to the Ethernet adapter.

Note :

To avoid damaging the FNW-9802-T with static electricity, touch the metal

chassis of your computer before proceeding with the installation. After

discharging the static electricity on your body, always make sure to hold the

edge of the board and avoid touching the parts on the board or the gold

colored edge connector.

1. Shut down the computer, and unplug its power cord.

2. Remove the computer's chassis cover. Read the computer's manual for

the procedure.

3. Remove the cover of an unused PCI extension slot.

Note :

The FNW-9802-T works only in bus master slots. See the computer's

manual to find a slot that supports bus master.

4. Insert the FNW-9802-T into a PCI extension slot.

5. Fix the adapter into the slot using the screws which held the slot's cover.

6. If you wish to enable the WOL feature of the adapter, connect the FNW-

9802-T adapter to the motherboard using the supplied WOL cable.

Attach each end of the WOL cable to the WOL connector on the adapter

and the motherboard.

7. Put the chassis cover back on the computer.

FNW-9802-T

The FNW-9802-T Fast Ethernet Adapter has a RJ-45 STP port to connect to

a 100BASE-TX Fast Ethernet or 10BASE-T Ethernet network. Please see

the following sections for more information.

■

Connecting to a 100BASE-TX Fast Ethernet network

To connect the FNW-9802-T Adapter to a 100BASE-TX Fast Ethernet

network, a Category 5 UTP cable (e.g. PLANEX UTP-xx-05, UTP-xx-DT)

with an RJ-45 connector at each end is required. The maximum cable

length is 100m. Follow the procedure below to connect to your network.

1. Plug one end of the cable into the RJ-45 port of the Adapter.

2. Plug the other end into a 100BASE-TX Fast Ethernet hub.

■

Connecting to a 10BASE-T Ethernet network

To connect the FNW-9802-T Adapter to a 10BASE-T Ethernet network, a

Category 3 or 5 UTP cable (e.g. PLANEX UTP-xx-05) with an RJ-45

connector at each end is required. The maximum cable length is 100m.

Follow this procedure to connect to your network.

1. Plug one end of the cable into the RJ-45 port of the Adapter.

2. Plug the other end into a 10BASE-T Ethernet hub.

Chapter 2

Adapter Installation

FNW-9802-T Adapter lnstallation

Connecting the Adapter to a Network

Содержание FNW-9802-T




















































Результаты поиска

Содержание FNW-9802-T

Отзывы:

Похожие инструкции для FNW-9802-T

Бренды по названию

Популярные бренды

Planex FNW-9802-T, Руководство пользователя

Результаты поиска

Содержание FNW-9802-T

Отзывы:

Похожие инструкции для FNW-9802-T

Бренды по названию

Популярные бренды