manualshive.com logo in svg

Planex FNW-9802-T, Руководство пользователя, Страница: 27 / 51

Поделиться
Скачать
Planex FNW-9802-T Скачать руководство пользователя страница 27

42

FNW-9802-T

4.  Click on the "Detailed Setting" tab.

5. Select "Media Type" from the Property and set "Value".  You can choose 

one of the following settings.

Auto Sense : 

The communication rate (100Base-TX/10Base-T) and the communication

mode (full-duplex/half-duplex) are automatically set by the Auto-

Negotiation function.

10BASET :

The communication rate will be fixed to 10BASE-T/half-duplex.

10BASET Full Duplex :

The communication rate will be fixed to 10BASE-T/full-duplex.

100BASETX :

The communication rate will be fixed to 100BASE-TX/half-duplex.

100BASETX Full_Duplex :

The communication rate will be fixed to 100BASE-TX/full-duplex.

41

FNW-9802-T

2. You will be asked to confirm your intention to delete, so click on the 

"OK" button.

3. Power off the computer and remove the FNW-9802-T from the 

computer.

The initial setting of the communication rate of the FNW-9802-T Adapter is

set by Auto-Negotiation (AutoSense).  Auto-Negotiation automatically sets

the appropriate communication rate and mode. To change these settings,

follow the procedure below:

1.  Double click on the "My Computer" icon and then double click on the 

"Control Panel" icon.

2.  Double click on the "Network" icon.

3. Select "FNW-9802-T Fast Ethernet Adapter" and click on the 

"Properties" button.

4

4

Setting the Communication Rate

Содержание FNW-9802-T




















































Отзывы:

Нет отзывов