Planet WAP-4050, Руководство пользователя

Страница: 31 / 52

- 31 -
Port interface. If using DHCP, and there is no current connection,
this will be blank or 0.0.0.0.
Network Mask The Network Mask associated with the IP Address above.
PPPoE Link Status This indicates whether or not the connection is currently
established.
·
If the connection does not exist, the Connect button can be
used to establish a connection.
·
If the connection currently exists, the Disconnect button can
be used to break the connection.
Connection Log
Connection Log
·
The Connection Log shows status messages relating to the
existing connection.
·
The most common messages are listed in the table below.
·
The Clear Log button will restart the Log, while the Refresh
button will update the messages shown on screen.
Buttons
Connect If not connected, establish a connection to your ISP.
Disconnect If connected to your ISP, hang up the connection.
Clear Log Delete all data currently in the Log. This will make it easier to
read new messages.
Refresh Update the data on screen.
CONNECTION LOG MESSAGES
Message Description
Connect on Demand Connection attempt has been triggered by the "Connect
automatically, as required" setting.
Manual connection Connection attempt started by the "Connect" button.
Reset physical
connection
Preparing line for connection attempt.
Connecting to remote
server
Attempting to connect to the ISP's server.
Remote Server located ISP's Server has responded to connection attempt.
Start PPP Attempting to login to ISP's Server and establish a PPP
connection.
PPP up successfully Able to login to ISP's Server and establish a PPP connection.