Planet WAP-4050, Руководство пользователя

Страница: 28 / 52

- 28 -
IP Address
IP Address is
assigned
automatically
Also called Dynamic IP Address. This is the default, and the most common
IP assignment method.
Only change this if advised to do so by the person or organization providing
the LAN/WAN port connection.
Specified
IP Address
Also called a Static IP Address. If this option is selected, the following data
must be entered.
·
IP Address - The IP address on the LAN or WAN.
·
Network Mask - The subnet mask associated with the IP address
above.
·
Gateway - The IP address of the router or gateway on the LAN or
WAN you are connecting to.
Note : If using PPPoE, the Network Mask and Gateway are not required;
just enter the IP address.
DNS
Automatically
obtain from
Serve
The DNS (Domain Name Server) address is normally obtained
automatically from the DHCP Server. Note that if using a fixed IP address,
this option cannot be used.
Use this DNS If this option is selected, you must enter the IP address of the DNS (Domain
Name Server) you wish to use.
If using a Static IP address, you must select this option.
MAC Address
MAC Address Also called Network Adapter Address or Physical Address . This is a
low-level network identifier, as seen from the WAN port.
Normally there is no need to change this, but if necessary, you can use the
Copy from PC button to copy your PC's address into this field. This is only
necessary if the MAC address of your PC has been recorded.
You can also use the Default button to insert the default value, or enter a
value directly.
Note:
To avoid problems regarding the MAC address, you should NOT swap the
LAN/WAN connection from your PC to the WAP-4050, or from the
WAP-4050 to your PC.
3.2.5 Ethernet (WAN) Port Status
This screen is accessible only when you log in the WAP-4050 in active AP/Router mode (Mode
Selector is in position 2). You can have the connection status by clicking the Status button, and the
information displayed is depending on the current connection method.