Planet WAP-4050, Руководство пользователя

Страница: 17 / 52

- 17 -
802.11 Mode Select the desired mode:
·
g & b - Both 802.11.g and 802.11b Wireless stations will be able to
use the WAP-4050.
·
g only - Only 802.11g Wireless stations can use the WAP-4050,
and obtain better performance than in g & b mix mode..
Channel No. This selection determines which operating frequency will be used. The
channel list changes according to the selected region.
Select the desired channel. Adjacent Access Points should use
different channels to avoid interference.
Security
The current security settings for wireless connections are displayed.
The default value is Off, meaning no security.
Wireless
Security
Click this button to access the Wireless Security sub-screen, and
modify the security settings as required.
Allow trusted
stations only
This feature can be used to prevent unknown Wireless stations from
using the WAP-4050. To use this feature:
·
Select the checkbox.
·
Click the Trusted Stations button to open a sub-window
containing the Trusted Wireless Stations screen, where you can
enter details of the Trusted Wireless Stations. See the following
section for further details.
Warning: Ensure your own PC is in the Trusted Stations list before you
enable this feature.
Copy
AP/Router
Mode
Settings
Clicking this button will copy the Wireless settings, including the
Trusted Station list, from the AP/Router mode to AP mode.
·
This is only useful if you already completed the configurations of
AP/Router mode.
·
The SSID will not be copied. Each mode must use a different
SSID. Using the same SSID for different modes would confuse
wireless clients.
3.1.2 Wireless Security
The default setting of this option is Disabled . You can select desired security system from the
drop-down list.