- 11 -
Chapter 2 Initial Configuration
2.1 System Requirements
Before installing WAP-4050, make sure that your system meets the following requirements:
·
Network cable. Use a standard 10/100BaseT network (UTP) cable with RJ45 connectors.
·
The administrative PC must be installed TCP/IP protocol, and configured as a DHCP client.
·
To use the Wireless interface, your PC must be compliant with the IEEE802.11b or
IEEE802.11g specifications.
2.2 Procedures
1.
Switch the mode selector to position 3 to enter Config mode.
2.
Power up and wait for the Wireless LED to turn on. This indicates the WAP-4050 is ready.
Note:
ONLY use the power adapter supplied with the WAP-4050. Otherwise, the product may be
damaged.
If you want to reset your WAP-4050 to default settings, press the Reset button for 8 seconds.
3.
Establish a wired or wireless connection to the WAP-4050. It is strongly suggested to use wired
connection to configuration.
·
Wired
–
directly connect a standard LAN cable from administrative PC to WAP-4050.
Please note there should be no hub or switch in between.
·
Wireless
–
use the wireless adapter to connect the WLAN with SSID: default. Please also
check the MAC address of target AP to ensure you are associating to the correct AP.
4.
Activate the web browser.
5.
Enter
“
config.ap
”
in the
“
Location
”
or
“
Address
”
field. Or you can access the WAP-4050 by its
default IP address in Config mode, i.e. http://192.168.0.1.
Note: Either being activated by wired or wireless interface. If the administrative PC has active
wired and wireless interfaces at the same time, it may not be able to access WAP-4050
successfully.
6.
By default, there is no username and password needed for the first time access. It is strongly
suggested to set admin login password for securing the management access.
7.
After successfully access the WAP-4050, you will see the
Mode Configuration
screen. As for the
detailed settings of each mode, please refer to following chapters.
Содержание WAP-4050
Страница 1: ...802 11g Wireless LAN Travel Kit WAP 4050 User s Manual...
Страница 5: ...3 3 6 PC Database 41 3 3 7 Security 42 3 4 CLIENT MODE 46 CHAPTER 4 TROUBLESHOOTING 51...
Страница 12: ...12 2 3 System Configuration The settings of System Configuration screen will apply to all modes...
Страница 26: ...26...