Planet WAP-4050, Руководство пользователя

Страница: 25 / 52

- 25 -
MAC Address
MAC Address Also called Network Adapter Address or Physical Address . This is a
low-level network identifier, as seen from the WAN port.
Normally there is no need to change this, but if necessary, you can
use the Copy from PC button to copy your PC's address into this
field. This is only necessary if the MAC address of your PC has been
recorded.
You can also use the Default button to insert the default value, or
enter a value directly.
Note:
To avoid problems regarding the MAC address, you should NOT swap
the LAN/WAN connection from your PC to the WAP-4050, or from the
WAP-4050 to your PC.
Identification
Hostname
Normally, this field has no effect.
If the LAN/WAN administrator asks you to use a particular Hostname,
enter it here.
Domain Name
Normally, this field has no effect.
If the LAN/WAN administrator asks you to use a particular Domain
name, enter it here
Other Connection Methods
Apart from Travel Mode (Hotel) , the other connection possibilities are:
·
PPPoE - this is the most common login method for DSL modems. Normally, your ISP will
provide some software to connect and login. If using the WAP-4050, this software is not
required, and should not be used.
·
PPTP - this is mainly used in Europe. You need to know the PPTP Server address as well
as your name and password.
·
L2TP - this is not widely used. You need to know the L2TP Server address as well as your
name and password.
·
No Login (Static IP address) - Use this if you have a static (fixed) IP address, and do not
need to login to a server to gain access to the LAN or WAN.
To determine which method to use, you should consult with the network administrator about related
information.
The following picture and table shows all available settings.