Planet WAP-4050, Руководство пользователя

Страница: 51 / 52

- 51 -
Chapter 4 Troubleshooting
This chapter covers some common problems that may be encountered while using the WAP-4050 and
some possible solutions to them.
Problem 1: Can't connect to the WAP-4050 to configure it.
Solution 1: Try using the wired Ethernet connection and the WAP-4050's IP address.
3. Connect a LAN cable from the WAP-4050 to the Ethernet port on your PC.
4. Set the WAP-4050 to "Config" mode.
5. Restart the WAP-4050.
6. Restart your PC. (Or, if you know how to do so, you could perform a Release and
Renew of the IP address on the Ethernet port.)
7. Start your Web browser.
8. Enter the Address as: HTTP://192.168.0.1
Problem 2: My PC can't locate the Wireless Access Point.
Solution 2:
·
Check the Broadcast SSID setting. Has it been disabled? If it has, the AP will not
be listed in Available Wireless Networks , and you will have to configure your
PC manually. If using manual configuration, ensure the mode is Infrastructure
and not Ad-hoc.
·
To see if radio interference is causing a problem, see if connection is possible
when close to the WAP-4050.
Remember that the connection range can be as little as 50 feet in poor
environments.
Problem 3: On my PC, I can locate the WAP-4050, but I can't establish a connection.
Solution 3:
·
The SSID on your PC and the Wireless Access Point must be the same.
Remember that the SSID is case-sensitive. So, for example "Workgroup" does
NOT match "workgroup".
·
Both your PC and the WAP-4050 must have the same settings for Wireless
security. The default setting for the WAP-4050 is disabled, so your wireless
station should also have Wireless security disabled.
If Wireless security is enabled on the WAP-4050, Wireless stations must use the
same settings as the WAP-4050.
·
If the WAP-4050 is set to Allow Trusted Stations only , then each of your
Wireless stations must be in the Trusted Wireless Stations list, or access will be
blocked.
Problem 4: Wireless connection speed is very slow.
Solution 4: The wireless system will connect at the highest possible speed, depending on the