Planet WAP-4050, Руководство пользователя

Страница: 33 / 52

- 33 -
IP Address The IP Address of this device, as seen from the Ethernet (WAN)
Port interface. If using DHCP, and there is no current connection,
this will be blank or 0.0.0.0.
PPTP Status This indicates whether or not the connection is currently
established.
·
If the connection does not exist, the Connect button can be
used to establish a connection.
·
If the connection currently exists, the Disconnect button can
be used to break the connection.
Connection Log
Connection Log
·
The Connection Log shows status messages relating to the
existing connection.
·
The Clear Log button will restart the Log, while the Refresh
button will update the messages shown on screen.
Buttons
Connect If not connected, establish a connection to your ISP.
Disconnect If connected to your ISP, hang up the connection.
Clear Log Delete all data currently in the Log. This will make it easier to read
new messages.
Refresh Update the data on screen.
L2TP
If using L2TP , a screen like the following example will be displayed when the Status button is clicked.