Planet WAP-4050, Руководство пользователя

Страница: 16 / 52

- 16 -
Chapter 3 Configuring the Wireless Access Point
3.1 AP Mode
WAP-4050 is not allowed to be configured in AP mode. Configuration for AP mode must be performed
while in Config Mode.
Please follow the procedures described in section 2.2 to access the Mode Configuration screen and
click on the Configure button in AP Mode.
3.1.1 AP Setup
Wireless
Region Select your region from the drop-down list. This field displays the
region of operation for which the wireless interface is intended. It may
not be legal to operate the device in a region other than the region
shown here. If your country or region is not listed, please check with
your local government agency for more information on which channels
you are allowed to use, and select a region that allows those channels.
(The channel list changes according to the selected region.)
SSID This field allows you to set the SSID of WAP-4050 in AP mode. The
SSID is an identification string that differentiates from other WLANs.
AP Mode and AP/Router mode must use different SSIDs. Using the
same SSID for both modes would confuse Wireless clients. The default
value is default_AP .
Broadcast
SSID
Enable or disable a Service Set Identifier broadcast. When enabled,
the SSID of the WAP-4050 is sent to wireless enabled devices on the
area, thus may cause unauthorized user to connect your wireless
networks.