Planet IGSW-2840, Руководство пользователя

Страница: 584 / 671

User’s Manual of IGSW-2840
584
Default Setting
Disabled
Command Mode
Interface Configuration
Command Usage
•
Security filtering discards any non-VoIP packets received on a port that are tagged with the voice VLAN ID. VoIP traffic
is identified by source MAC addresses configured in the Telephony OUI list, or through LLDP that discovers VoIP
devices attached to the switch. Packets received from non-VoIP sources are dropped.
•
When enabled, be sure the MAC address ranges for VoIP devices are configured in the Telephony OUI list ( voice vlan
mac-address ).
Example
The following example enables security filtering on port 1.
Console(config)#interface ethernet 1/1
Console(config-if)#switchport voice vlan security
Console(config-if)#
switchport voice vlan priority
This command specifies a CoS priority for VoIP traffic on a port. Use the no form to restore the default priority on a port.
Syntax
switchport voice vlan priority priority-value
no switchport voice vlan priority
priority-value -The CoS priority value. (Range: 0-6)
Default Setting
6
Command Mode
Interface Configuration
Command Usage
Specifies a CoS priority to apply to a port’s VoIP traffic on the Voice VLAN. The priority of any received VoIP packet is
overwritten with the new priority when the Voice VLAN feature is active for a port.
Example
The following example sets the CoS priority to 5 on port 1.
Console(config)#interface ethernet 1/1
Console(config-if)#switchport voice vlan priority 5
Console(config-if)#