Planet IGSW-2840, Руководство пользователя

Страница: 380 / 671

User’s Manual of IGSW-2840
380
Using the command without specifying a timeout restores the default setting.
Example
To set the timeout to two minutes, enter this command:
Console(config-line)#exec-timeout 120
Console(config-line)#
Related Commands
silent-time
timeout login response
password-thresh
This command sets the password intrusion threshold which limits the number of failed logon attempts. Use the no form to
remove the threshold value.
Syntax
password-thresh [threshold]
no password-thresh
threshold - The number of allowed password attempts.
(Range: 1-120; 0: no threshold)
Default Setting
The default value is three attempts.
Command Mode
Line Configuration
Command Usage
When the logon attempt threshold is reached, the system interface becomes silent for a specified amount of time before
allowing the next logon attempt. (Use the silent-time command to set this interval.) When this threshold is reached for
Telnet, the Telnet logon interface shuts down.
This command applies to both the local console and Telnet connections.
Example
To set the password threshold to five attempts, enter this command:
Console(config-line)#password-thresh 5
Console(config-line)#
Related Commands
silent-time
timeout login response
silent-time
This command sets the amount of time the management console is inaccessible after the number of unsuccessful logon
attempts exceeds the threshold set by the password-thresh command. Use the no form to remove the silent time value.