Planet IGSW-2840, Руководство пользователя

Страница: 456 / 671

User’s Manual of IGSW-2840
456
dot1x default
This command sets all configurable dot1x global and port settings to their default values.
Command Mode
Global Configuration
Example
Console(config)#dot1x default
Console(config)#
dot1x max-req
This command sets the maximum number of times the switch port will retransmit an EAP request/identity packet to the client
before it times out the authentication session. Use the no form to restore the default.
Syntax
dot1x max-req count
no dot1x max-req
count – The maximum number of requests (Range: 1-10)
Default
2
Command Mode
Interface Configuration
Example
Console(config)#interface eth 1/2
Console(config-if)#dot1x max-req 2
Console(config-if)
dot1x port-control
This command sets the dot1x mode on a port interface. Use the no form to restore the default.
Syntax
dot1x port-control {auto | force-authorized | force-unauthorized} no dot1x port-control auto – Requires a dot1x-aware
connected client to be authorized by the RADIUS server. Clients that are not dot1x-aware will be denied access.
force-authorized – Configures the port to grant access to all clients, either dot1x-aware or otherwise.
force-unauthorized – Configures the port to deny access to all clients, either dot1x-aware or otherwise.
Default
force-authorized