Planet IGSW-2840, Руководство пользователя

Страница: 460 / 671

User’s Manual of IGSW-2840
460
dot1x timeout tx-period
This command sets the time that an interface on the switch waits during an authentication session before re-transmitting an EAP
packet. Use the no form to reset to the default value.
Syntax
dot1x timeout tx-period seconds
no dot1x timeout tx-period
seconds -The number of seconds. (Range: 1-65535)
Default
30 seconds
Command Mode
Interface Configuration
Example
Console(config)#interface eth 1/2
Console(config-if)#dot1x timeout tx-period 300
Console(config-if)#
dot1x intrusion-action
This command sets the port’s response to a failed authentication, either to block all traffic, or to assign all traffic for the port to a
guest VLAN. Use the no form to reset the default.
Syntax
dot1x intrusion-action {block-traffic | guest-vlan} no dot1x intrusion-action
block-traffic - Blocks traffic on this port.
guest-vlan - Assigns the user to the Guest VLAN.
Default
block-traffic
Command Mode
Interface Configuration
Command Usage
For guest VLAN assignment to be successful, the VLAN must be configured and set as active ( see “ vlan database ”) and
assigned as the guest VLAN for the port (see “ network-access guest-vlan ”).
Example
Console(config)#interface eth 1/2
Console(config-if)#dot1x intrusion-action guest-vlan
Console(config-if)#