Planet IGSW-2840, Руководство пользователя

Страница: 377 / 671

User’s Manual of IGSW-2840
377
There is no default line.
Command Mode
Global Configuration
Command Usage
Telnet is considered a virtual terminal connection and will be shown as “VTY” in screen displays such as show users.
However, the serial communication parameters (e.g., databits) do not affect Telnet or SSH connections.
Example
To enter console line mode, enter the following command:
Console(config)#line console
Console(config-line)#
Related Commands
show line
show users
login
This command enables password checking at login. Use the no form to disable password checking and allow connections
without a password.
Syntax
login [local] no login
local -Selects local password checking. Authentication is based on the user name specified with the username command.
Default Setting
login local
Command Mode
Line Configuration
Command Usage
There are three authentication modes provided by the switch itself at login: -login selects authentication by a single global
password as specified by the password line configuration command. When using this method, the management interface
starts in Normal Exec (NE) mode. -login local selects authentication via the user name and password specified by the
username command (i.e., default setting). When using this method, the management interface starts in Normal Exec (NE)
or Privileged Exec (PE) mode, depending on the user’s privilege level (0 or 15 respectively).
no login selects no authentication. When using this method, the management interface starts in Normal Exec (NE) mode.
This command controls login authentication via the switch itself. To configure user names and passwords for remote
authentication servers, you must use the RADIUS or TACACS software installed on those servers.
Example
Console(config-line)#login local
Console(config-line)#