Planet IGSW-2840, Руководство пользователя

Страница: 457 / 671

User’s Manual of IGSW-2840
457
Command Mode
Interface Configuration
Example
Console(config)#interface eth 1/2
Console(config-if)#dot1x port-control auto
Console(config-if)#
dot1x operation-mode
This command allows single or multiple hosts (clients) to connect to an 802.1X-authorized port. Use the no form with no
keywords to restore the default to single host. Use the no form with the multi-host max-count keywords to restore the default
maximum count.
Syntax
dot1x operation-mode {single-host | multi-host [max-count count]}
no dot1x operation-mode [multi-host max-count]
single-host – Allows only a single host to connect to this port.
multi-host – Allows multiple host to connect to this port.
max-count – Keyword for the maximum number of hosts. count – The maximum number of hosts that can connect to a
port. (Range: 1-1024; Default: 5)
Default
Single-host
Command Mode
Interface Configuration
Command Usage
The “max-count” parameter specified by this command is only effective if the dot1x mode is set to “auto” by the dot1x
port-control command (page 4-120).
In “multi-host” mode, only one host connected to a port needs to pass authentication for all other hosts to be granted
network access. Similarly, a port can become unauthorized for all hosts if one attached host fails re-authentication or
sends an EAPOL logoff message.
Example
Console(config)#interface eth 1/2
Console(config-if)#dot1x operation-mode multi-host max-count 10
Console(config-if)#