Planet IGSW-2840 Скачать руководство пользователя страница 271

Страница: 271 / 671

User’s Manual of IGSW-2840

271

4.11.6.9 AAA Accounting Statistics Summary

Object

Description

User Name

Displays a registered user name.

Interface

Displays the receive port number through which this user accessed the switch.

Time Elapsed

Displays the length of time this entry has been active.

4.11.6.10 Authorization Settings

AAA authorization is used to verify that a user has access to specific services.

Figure 4-11-13

AAA Authorization Settings screenshot

Click Security



AAA



Authorization



Settings. To configure a new authorization method, specify a method name and a

group name, select the service, then click Add.

The page includes the following fields:

Object

Description

Method Name

Specifies an authorization method for service requests.

The “default” method is used for a requested service if no other methods have

been defined.

(Range: 1-255 characters)

Service Request

Specifies the service as Exec (authorization for local

console

Telnet

connections).

Group Name

Specifies the authorization server group.

(Range: 1-255 characters)

The group name “” specifies all configured hosts (see

“

Configuring Local/Remote Logon Authenticatio

n”). Any other group name

refers to a server group configured on the Group Settings page.

Authorization is only supported for servers.

Содержание IGSW-2840
































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание IGSW-2840

Отзывы:

Бренды по названию

Популярные бренды

Planet IGSW-2840, Руководство пользователя

Результаты поиска

Содержание IGSW-2840

Отзывы:

Бренды по названию

Популярные бренды