5.2 Software Installation
Refer to the following description to install the remote monitoring software.
5.2.1 Change Internet Settings
The PC operating with the remote monitoring software should be set to accept ActiveX
plug-ins. Please follow the steps to set the Internet security settings appropriately.
•
Before operating the remote monitoring software, please check the IP address of the DVR. To
check the IP address, press MENU key on the unit and enter username and password to
access OSD setup menu. Select <System Setup>, <Network Setup>, then <LAN Setup> to
check the IP.
•
Start the IE; it can be started either by clicking on the desktop icon, or by using the Start menu
to access it.
NOTE:
Windows IE provides the ActiveX component that is required when using the
remote monitoring software.
•
Select <Tools> from the main menu of the browser, then <Internet Options>, and then click the
<Security> tab.
•
Select <Trusted sites> and click <Sites> to specify its security setting.
•
Uncheck “Require server verification (https:) for all sites in this zone”. Type the IP address of
the unit in field and click <Add> to add this web site to the zone.
-
51
-