Dome Preset
First Page
Index
1
2
3
4
5
6
7
Set Preset
No
No
No
No
No
No
No
Go Preset
No
No
No
No
No
No
No
•
Use UP / DOWN keys to select the desired preset number from the menu.
•
Set the <Go Preset> of the selected preset number to <Yes>, and press ENTER to call the
preset point.
•
Now the selected dome camera rotates to the preset position automatically.
4.6 Intercom Function
Intercom function enables the DVR site to communicate with the camera site. This function
will be available when the optional Audio Out connectors are installed and the audio output
devices are connected.
To initiate communication, press and hold any channel key for 2 seconds. When the
communication starts, below message will be shown on the screen:
INTERCOM
YOU ARE NOW COMMUNICATING WITH CHANNEL
02
At this time, users will be able to hear audio from the camera site, even if the audio output
setting is disabled in the OSD setup menu. To start speaking to the camera site, press and hold
the DOME key. Once the DOME key is released, the audio from the camera site will be heard
again.
To terminate intercom, press the same channel key or press ESC.
NOTE:
Intercom function is not available for channel 1.
4.7 UPnP Function
UPnP is the abbreviation for Universal Plug and Play, which is a relatively new technology that
integrates a universal protocol for widespread plug-and-play devices to ease the network
implementation. When a PC and a DVR both installed the UPnP function, the PC can automatically
recognize the DVR in the same local area network.
-
48
-
