Planar PY4200, Руководство пользователя

Страница: 22 / 48

Setting Up the Display 18
Connecting Power
Plug one end of the power cord into the AC-IN jack on the display, and the other end into an
appropriate wall power outlet (if the outlet is switched, turn on the switch). The display will
enter standby mode and the power indicator will light up red.
Notes:
• The supplied power cord is suitable for use with 110-240V AC power only.
• The type of power cord plug and socket illustrated may differ from the type used in your
region.
• Only use an appropriate power cord for your region. Never use a power cord which
appears damaged or frayed, or change the plug type on the power cord.
• Be aware of the total loading when using extension cords or multiple outlet power boards.
• This display has no power switch. When installing the display, incorporate a readily
accessible disconnect device in the fixed wiring, or connect the power cord to socket-
outlet which must be provided near the display and easily accessible. If a fault should
occur during operation of the unit, operate the disconnect device to switch the power
supply off, or disconnect the power cord.
• There are no user serviceable parts in this display. Never unscrew or remove any covers.
There are dangerous voltages inside. Turn off the power and unplug the power cord before
moving the display.
AC-IN jack
Power cord
Wall power outlet