Pitney Bowes F767, Руководство оператора

Страница: 48 / 66

3-14 SDC927D
3 • Programming
Modifying a
Program
With the feeder ON, press the
Green
,
Blue
and
Red
buttons at the same
time. The display will show:
Select: NEW NON-SCANNING JOB
<-->=SELECT Green=Confirm Blue=EXIT
Select: MODIFY JOB
<-->=SELECT Green=Confirm Blue=EXIT
Use the Arrow Buttons to select ‘MODIFY JOB’.
Press the Green button to enter the job modify mode.
Use the Arrow Buttons to display the program you want to modify on the
top line of the display. Then press the Green button to select it.
You can now review the job using the Arrow Buttons . You can also edit any
of the following parameters:
• Name of program
• Material
• Loading
orientation
• Counter (non-scanning job only)
• Scan line increments (scanning job only)
• Distance – Lead edge to bench mark (scanning job only)
To edit any of these parameters, with the parameter displayed:
• Press the
Green button to select the parameter.
• Press the Arrow Buttons to make the change.
• Confirm the change by pressing the Green button.