Pitney Bowes F767, Руководство оператора

Страница: 46 / 66

3-12 SDC927D
3 • Programming
Paper/DF
Sheets with double detect turned
ON
(default setting).
This will be the most common setting for sheets.
Paper
Sheets with the double detect turned
OFF
. This is not
recommended as the feeder will not sense double
feeds. Select this mode for material (sheets) above
160 g/m
2
(42 lb).
Booklet This function is not used in scanning mode.
Booklet/RM This function is not used in scanning mode.
Paper/DF+ Sheets with double detect turned on at a custom
setting. This is normally used for sheets with
heavily printed block areas and will be used only on
advice from your service representative.
Press Green to confirm your selection. The display shows the material
loading orientation selection:
019> Loading orientation : 3.DOWN-BOTTOM
<-->=SELECT Green=CONFIRM Blue=EXIT
019> Vers.: BCR Standard
<-->=SELECT Green=CONFIRM Blue=EXIT
Use the Arrow Buttons to select the material loading orientation:
1 Face up, bottom first
2 Face up, top first
3
Face down, bottom first
4 Face down, top first
Press Green to confirm your selection. The display requests the scanning
version:
Use the Arrow Buttons to select which scanning mode you want. In this
example, select ‘BCR Standard’. Press Green to confirm.
The display will now ask where the BCR Scanner is located: