Pitney Bowes F767, Руководство оператора

Страница: 40 / 66

3-6 SDC927D
3 • Programming
You can enter a program name up to eight characters long, using any
combination of alpha and numeric characters.
Use the
Arrow Buttons until the first character of your program name
appears.
Press the
Green button to confirm each character.
When the name is complete, press
Red
to continue. The display shows the
material selection screen:
018> Name of new program : --------
<-->=ALPHA Green=CONFIRM Red=GO ON
018> Material: PAPER/DF
<-->=SELECT Green=CONFIRM Blue=EXIT
Use the
Arrow Buttons
to select the material for this job:
Paper/DF Sheets with double detect turned ON (default setting).
This will be the most common setting for sheets.
Paper Sheets with the double detect turned OFF . This is not
recommended as the feeder will not sense double
feeds. Select this mode for material (sheets) above
160g/m
2
(42 lb).
Booklet This function is not used in scanning mode.
Booklet/RM
This function is not used in scanning mode.
Paper/DF+
Sheets with double detect turned on at a custom
setting. This is normally used for sheets with
heavily printed block areas and will be used only on
advice from your service representative.
Note: Switch the Loader to Off to load material manually.
Press Green to confirm your selection. The display shows the material
loading orientation selection:
018> Loading orientation : 3.DOWN-BOTTOM
<-->=SELECT Green=CONFIRM Blue=EXIT