Pitney Bowes F767, Руководство оператора

Страница: 47 / 66

SDC927D
3-13
Programming • 3
019> BCR location : Top Front
<-->=SELECT Green=CONFIRM Blue=EXIT
Use the Arrow Buttons to select where the BCR scanner is located,
Bottom Rear, Bottom Front, Top Rear or Top Front. Press Green to confirm.
Programming a BCR scanning job is now complete.
With the feeder ON, press the
Green
,
Blue
and
Red
buttons at the same
time. The display will show:
Deleting a
Program
Select: NEW NON-SCANNING JOB
<-->=SELECT Green=Confirm Blue=EXIT
Use the Arrow Buttons to select ‘DELETE JOB’.
Select: DELETE JOB
<-->=SELECT Green=Confirm Blue=EXIT
Press the Green button to enter the job delete mode.
Use the Arrow Buttons to display the program you want to delete on the
top line of the display.
CAUTION: Make sure you’ve selected the right program and that you
really want to delete it. You can’t recover a deleted program. If you
accidentally delete a program, you’ll have to reprogram the feeder for
that particular job.
Press the Green button to delete the program.
The display will briefly prompt 'Program ******** Deleted' and return to the
program listing.