Pitney Bowes F767, Руководство оператора

Страница: 20 / 66

2-4 SDC927D
2 • Operation
The display will show the last program run on the top line. Use the Arrow
Buttons to scroll through the list of available programs.
To select a program, scroll so it appears on the first line of the display as
indicated by the arrow and <PROG prompt. Press the Green button to
select the program.
Select the
Program
New program. Pre run adjustments?
Green=YES Blue=EXIT Red=NO
The display asks if you wish to run pre-run adjustments. If this is a new job,
press Green and carry out the adjustments as described on pages 2-5 to
2-13. If it is the current job, or the pre-run adjustments have already been
completed, then press Red .
JOB1 PAPER/DF C=1 ORIENTATION 3
Count: 00 Total: 000000 R... Speed: 100%
Program Name
Material and
Handling Options
Loading Orientation
'Live' count of
sheets fed in
current collation
Total Count for
this job run
R shows the
F767 is ready
Speed selected
OMR status
- see page 2-17
The display shows the program selected and the main program options.
To set speed, use the Arrow Buttons until the speed you want is displayed.
You may need to adjust the speed when running booklets or certain paper
finishes.
Number of sheets
in each collated set
DI900/DI950
Inserter signal
confirmation
- see page 2-17
The instructions which follow assume that the program you want is available
from the list in the machine’s memory. If necessary, see ‘Adding a Non-
Scanning Program’ on page 3-2, or ‘Adding a Scanning Program’ on page
3-5 for programming instructions.