Pitney Bowes F767, Руководство оператора

Страница: 27 / 66

SDC927D
2-11
Operation • 2
Top Scanning
Connect power and turn ON. Open the Top Cover.
Open the separator. Unlock lever
a , turn knob c clockwise as far as
it will go and hold in position while
locking lever a .
Press the
Green
,
Blue
and
Red
buttons at the same time to enter the
Menu. Use the Arrow Buttons to select 'User Menu', then press Green
to confirm. Use the Arrow Buttons to select 'BCR Test', then press
Green to confirm.
If your system has more than one BCR scanner, use the Arrow Buttons
to select 'BCR Location', then press Green to confirm. Select the
location of the scanner you wish to test, then press Green to confirm.
Slide a sheet under the separator and observe the scanner beam on the
sheet.
Adjust the scanner side to side until
the marks are centred on the beam
area.
When in 'BCR Test', the scanner
red lights will flash slowly. If the
code is read successfully i.e. the
scanner is correctly aligned, the
lights will flash faster and the
characters read will display on the
operator display.
When the scanner is positioned correctly, exit from the User Menu.
Close the cover.