iPod/USB playback
07
41
En
Engli
s
h
Françai
s
Deut
sc
h
Ne
d
erlan
ds
Italiano
E
s
pañol
Chapter 7
iPod/USB playback
Connecting an iPod
This unit has a dedicated iPod terminal that
will allow you to control playback of audio
content from your iPod using the controls of
this unit.
1
Connecting your iPod to this unit
1
Set this unit to the standby mode, and
then use the USB cable (for iPod connection)
2
to connect your iPod to the iPod DIRECT/USB
terminal on the front panel of this unit.
For the cable connection, refer to also the
operating instructions for iPod.
2
Switch the unit on and press the iPod
input source button on the remote control to
switch the unit to the iPod.
The front panel display shows
Loading
while
the unit verifies the connection and retrieves
data from the iPod.
3
Press TOP MENU to display iPod Top
menu.
When the display shows
Top Menu
you’re
ready to play music from the iPod.
3
• If after pressing
iPod
the display shows
No Device
, try switching off the unit and
reconnecting the iPod to the unit.
iPod playback
To navigate songs on your iPod, you can take
advantage of the OSD of your TV connected to
this unit.
4
You can also control all operations
for music in the front panel display of this unit.
Note
1 • This unit is compatible with the audio of iPod nano, iPod fifth generation, iPod classic, iPod touch (not supported iPod shuffle
and iPhone). However, that some of the functions may be restricted for some models. Note, however, compatibility may vary
depending on the software version of your iPod. Please be sure to use the latest available software version.
• iPod is licensed for reproduction of non-copyrighted materials or materials the user is legally permitted to reproduce.
• Features such as the equalizer cannot be controlled using this unit, and we recommend switching the equalizer off before
connecting.
• Pioneer cannot under any circumstances accept responsibility for any direct or indirect loss arising from any inconvenience
or loss of recorded material resulting from the iPod failure.
iPod DIRECT / USB
OPEN / CLOSE
PHONES
MCACC
iPod DIRECT/USB
MENU
iPod
USB cable (for
iPod connection)
2 The USB cable (for iPod connection) is not included with this unit.
3 The controls of your iPod will be inoperable when connected to this unit. Features such as the equalizer cannot be controlled
using this unit, and we recommend switching the equalizer off before connecting.
4 • Note that non-roman characters in the title are displayed as
#
.
• This feature is not available for photos or video clips on your iPod.
HTZ-LX61DV_En.book 41 ページ 2008年7月31日 木曜日 午前9時26分