Listening to your system
05
28
En
Chapter 5
Listening to your system
Important
• This unit’s audio function may be restricted
depending on the sound source, Line
Output setting (page 60), and HDMI audio
setting (page 68). In this event, the menus
may not appear, or a message may be
displayed instead (page 88).
Auto listening mode
The Auto listening mode is the simplest way to
listen to any source as it was mastered: the
output from the speakers mirrors the channels
in the source material.
• If you set up the system for Front surround
(page 8), the Front Stage Surround modes
will give the best results (page 29).
•
Press to select the Auto listening
mode.
1
• When playing stereo sources, the
STEREO
indicator will light. The
2
D
indicator will
light when playing a Dolby Surround sound
source.
Listening in surround sound
You can listen to stereo or multichannel
sources in surround sound. Surround sound is
generated from stereo sources using one of
the Dolby Pro Logic decoding modes.
• If you set up the system for Front surround
(page 8), the Front Stage Surround modes
will give the best results (page 29).
•
Press repeatedly to select a
listening mode.
1
The choices that appear in the display will vary
according to the type of source that’s playing.
With two channel sources
, you can select from:
•
Auto
– See
Auto listening mode
above
•
2
PL II Movie
(Dolby Pro Logic II Movie)
2
–
5.1 channel surround sound, especially
suited to movie sources
•
2
PL II Music
(Dolby Pro Logic II Music)
2
–
5.1 channel surround sound, especially
suited to music sources; see
Dolby Pro
Logic II Music settings
below
•
2
Pro Logic
(Dolby Pro Logic)
2
– 4.1
channel surround sound for use with any
two-channel source
•
Stereo
– See
Listening in stereo
on page 30
•
A.L.C.
– See
Listening in stereo
on page 30
With multichannel sources
, you can select
(according to format):
•
Auto
– See
Auto listening mode
above
•
Stereo
– See
Listening in stereo
on page 30
•
A.L.C.
– See
Listening in stereo
on page 30
Dolby Pro Logic II Music settings
When listening in Dolby Pro Logic II Music
mode (see above), there are three settings you
can adjust: Center Width, Dimension, and
Panorama.
1
Press when Dolby Pro Logic II Music
mode is active.
Note
1 • If the source is Dolby Digital or DTS, the corresponding indicator lights in the front panel display.
• During 88.2 kHz/96 kHz source playback, the listening mode is fixed to
Auto
and cannot be changed.
SURROUND
2 The
2
PL II
indicator will light.
SURROUND
SOUND
HTZ-LX61DV_En.book 28 ページ ２００８年７月３１日 木曜日 午前９時２６分
