Connecting up
02
14
En
1
Assemble the AM loop antenna.
a. Bend the stand in the direction indicated by
the arrow.
b. Clip the loop onto the stand.
c. If you want to fix to a wall or other surface,
perform step b after first securing the
stand with screws.
It is recommended that you determine the
reception strength before securing the
stand with the screws.
2
Connect the AM and FM antennas
1
.
a. Connect one wire of the AM loop antenna
to each AM antenna terminal
2
.
For each terminal, press down on the tab to
open; insert the wire, then release to
secure.
b. Push the FM antenna
3
plug onto the center
pin of the FM antenna socket.
3
Connect each speaker.
• You may purchase and use your own
speaker cables if desired. For details, see
Using your own speaker cables
on page 83.
• The front and surround speaker cables
have a color-coded connector at one end
and two bare wires at the other end.
• Two purple cables are provided for the
subwoofer, one 13 ft. (4 meters) and the
other 32 ft. (10 meters) in length. Use the
appropriate cord depending on the length
needed for the installation location.
• Since there is only one terminal to connect
the two center speakers, you will need to
use the supplied Y-cable for the connection.
• Twist and pull off the protective shields on
each wire.
• Connect the wires to the speaker. Each
speaker in the illustration can be identified
by means of the color-coded indicator
provided on the rear-surface label.
Note
1 • Keep antenna cables away from the receiver and other cables.
• If reception with the supplied antenna is poor, see
Improving poor FM reception
and
Improving poor AM sound
on
page 46 or
Connecting external antennas
on page 66.
• Do not attach any antenna other than the provided loop antenna, or an external antenna as described on page 61.
2 • Don’t let it come into contact with metal objects and avoid placing near computers, television sets or other electrical
appliances.
• If radio reception is poor, you may be able improve it by re-inserting each antenna wire into the opposite terminal.
• For best reception, do not untwist the AM loop antenna wires or wrap them around the loop antenna.
3 To ensure optimum reception, make sure the FM antenna is fully extended and not coiled or hanging at the rear of
the unit.
fig. a
fig. b
fig. c
1
2
3
Color-coded wire
(Connect to speaker)
Color-coded connector
(Connect to rear panel)
HTZ-LX61DV_En.book 14 ページ ２００８年７月３１日 木曜日 午前９時２６分
