Pioneer SC-9540, Руководство по эксплуатации

Страница: 123 / 138

Additional information
13
123
en
Important information regarding the HDMI connection
The r e a r e cases whe r e you may not be able to r oute HDMI signals th r ough this r eceive r (this de p ends on the HDMI-
equi pp ed com p onent you a r e connecting–check with the manufactu r e r fo r HDMI com p atibility info r mation).
If you a r en’t r eceiving HDMI signals pr o p e r ly th r ough this r eceive r (f r om you r com p onent), p lease t r y one of the
following configu r ations when connecting u p .
Configuration A
Use com p onent video cables to connect the video out p ut
of you r HDMI-equi pp ed com p onent to the r eceive r ’s
com p onent video in p ut. The r eceive r can then conve r t the
analog com p onent video signal to a digital HDMI signal
fo r t r ansmission to the dis p lay. Fo r this configu r ation,
use the most convenient connection (digital is
r ecommended) fo r sending audio to the r eceive r . See the
o p e r ating inst r uctions fo r mo r e on audio connections.
Note
• The p ictu r e quality will change slightly du r ing
conve r sion.
Configuration B
Connect you r HDMI-equi pp ed com p onent di r ectly to the
dis p lay using an HDMI cable. Then use the most
convenient connection (digital is r ecommended) fo r
sending audio to the r eceive r . See the o p e r ating
inst r uctions fo r mo r e on audio connections. Set the
dis p lay volume to minimum when using this
configu r ation.
Note
• If you r dis p lay only has one HDMI te r minal, you can
only r eceive HDMI video f r om the connected
com p onent.
• De p ending on the com p onent, audio out p ut may be
limited to the numbe r of channels available f r om the
connected dis p lay unit (fo r exam p le audio out p ut is
r educed to 2 channels fo r a monito r with ste r eo audio
limitations).
• If you want to switch the in p ut function, you’ll have to
switch functions on both the r eceive r and you r
dis p lay unit.
• Since the sound is muted on the dis p lay when using
the HDMI connection, you must adjust the volume on
the dis
p lay eve r y time you switch in p ut functions.
HOME MEDIA GALLERY
Am p -linked o p e r ation not
p ossible using KURO LINK
function.
• Check the HDMI connections.
• The cable may be damaged.
• Select
ON fo r the KURO LINK setting (see KURO LINK Setup on p age 80).
• Tu r n the TV’s p owe r on befo r e tu r ning on this r eceive r ’s p owe r .
• Set the TV side KURO LINK setting to ON .
• Connect the TV to the
HDMI OUT 1
te r minal and set the HDMI out p ut to
HDMI OUT 1
. Then tu r n
on fi r st the TV’s p owe r , then this r eceive r ’s p owe r .
Symptom Remedy
Symptoms Causes Remedies
Cannot access the netwo r k. The LAN cable is not fi r mly connected. Fi r mly connect the LAN cable ( p age 67).
The r oute r is not switched on. Switch on the r oute r .
Inte r net secu r ity softwa r e is cu rr ently installed in
the connected com p onent.
The r e a r e cases whe r e a com p onent with Inte r net
secu r ity softwa r e installed cannot be accessed.
The audio com p onent on the netwo r k which has
been switched off is switched on.
Switch on the audio com p onent on the netwo r k
befo r e switching on this r eceive r .
Playback does not sta r t while
‘Connecting...’ continues to
be dis p layed.
The com p onent is cu rr ently disconnected f r om
this r eceive r o r the p owe r su pp ly.
Check whethe r the com p onent is pr o p e r ly
connected to this r eceive r o r the p owe r su pp ly.
SC-9540.book 123 ページ ２００９年４月２４日 金曜日 午後１時４２分