Connecting up
03
27
En
English
Français
Deutsch
Nederlands
Italiano
Español
1
Assemble the AM loop antenna.
a. Bend the stand in the direction indicated by
the arrow.
b. Clip the loop onto the stand.
c. If you want to fix to a wall or other surface,
perform step b after first securing the
stand with screws.
It is recommended that you determine the
reception strength before securing the
stand with the screws.
2
Connect the AM and FM antennas
1
.
a. Connect one wire of the AM loop antenna
to each AM antenna terminal
2
.
For each terminal, press down on the tab to
open; insert the wire, then release to
secure.
b. Push the FM antenna
3
plug onto the center
pin of the FM antenna socket.
3
Connect the Blu-ray disc player to the
receiver.
Plug the HDMI cable into the
HDMI IN 1
jack
on the rear of the receiver.
Plug the other end of the cable into the
HDMI
OUT
jack on the rear of the Blu-ray disc player.
4
Connect the receiver to your TV.
Connect the
HDMI OUT
jack on receiver to an
HDMI input on your TV.
• You can have audio from the receiver, as
well as audio and video from the Blu-ray
disc player, output to your TV by
connecting with a single HDMI cable.
To connect to a TV with no HDMI input, see
Connecting to a TV with no HDMI input
on
page 79.
5
Connect an audio cable from your TV to
the receiver.
To listen to TV audio on this unit, connect the
TV’s audio output to
DIGITAL IN1 (OPTICAL)
on the receiver.
4
Use a coaxial audio cable to connect to a TV
with no optical digital audio input, see
Using
this unit for TV audio
on page 46.
• To use the HDMI Control function when you
are connected to a supported Pioneer Flat
Screen TV, you must connect via HDMI.
You must first set ‘
TV Input
’ to switch the input
source of this unit to TV audio or to switch the
audio from a Flat Screen TV with the HDMI
Control function. For more information, see
Audio input settings from the TVs (TV Input)
on
page 46.
Note
1 • Keep antenna cables away from the receiver and other cables.
• If reception with the supplied antenna is poor, see
Improving poor FM reception
and
Improving poor AM sound
on
page 39 or
Connecting external antennas
on page 49.
• Do not attach any antenna other than the provided loop antenna, or an external antenna as described on page 49.
2 • Don’t let it come into contact with metal objects and avoid placing near computers, television sets or other electrical
appliances.
• If radio reception is poor, you may be able improve it by re-inserting each antenna wire into the opposite terminal.
• For best reception, do not untwist the AM loop antenna wires or wrap them around the loop antenna.
3 To ensure optimum reception, make sure the FM antenna is fully extended and not coiled or hanging at the rear of
the unit.
fig. a
fig. b
fig. c
1
2
3
4 When digital connections are used, it may be necessary to adjust the digital audio output settings on the TV. For
details, consult the operating instructions for your TV.
LX03BD_1.book Page 27 Monday, July 28, 2008 2:12 PM
Содержание LX03BD
Страница 68: ... Section Two Blu ray Disc Player BDP LX08 ...
