Pioneer LX03BD Скачать руководство пользователя страница 90

Страница: 90 / 132

Playback

Chapter 4

Playback

Important

• Set the remote control operation selector

switch to

to operate the Blu-ray disc

player.

Playing discs or files

This section describes the player’s main
operations.

For the types of discs that can be played, see

Playable discs

on page 71. For the types of files

that can be played, see

Playable files

page 74. Movie and music files recorded on
discs are played with Home Media Gallery
(page 100).

Press



BD to turn on the power.

Turn the TV’s power on and switch its input
beforehand.

Press



OPEN/CLOSE on the

front panel to open the disc tray and load the
disc.

Note

• Load the disc with the printed

side facing up.

• Several dozen seconds are

required to read the disc. Once
reading is completed, the type of
disc is displayed on the player’s
front panel display.

Press



(play) to play the disc.

To pause, press



(pause) during playback.

To stop, press



(stop) during playback.

Note

• Some discs start playing automatically

when the disc tray is closed.

• DVD-Video discs have parental lock

features. Input the password registered in
the player’s settings to unlock the parental
lock. For details, see page 117.

• For some BD-R/-RE, playback protection is

set for the disc or titles. Input the code
number set for the disc to unlock the
protection.

If the disc menu is displayed

For some discs, the disc menu is displayed
automatically when playback starts. The
contents of the disc menu and the way to
operate differ from disc to disc.

Resuming playback from where it was
stopped (resume playback function)

• When



(stop) is pressed during playback,

the point at which the disc stopped is
stored in the memory. When



(play) is

pressed, playback resumes from that point.

• For CDs and music files, playback starts

from the beginning of the track/file that
was playing.

• To cancel the resume playback function,

press



(stop) while playback is stopped.

RECEIVER

iPod



LX03BD_2.book Page 90 Monday, July 28, 2008 4:30 PM

Содержание LX03BD





































































































































Результаты поиска

Содержание LX03BD

Отзывы:

Похожие инструкции для LX03BD

Бренды по названию

Популярные бренды

Pioneer LX03BD, Руководство по эксплуатации

Результаты поиска

Содержание LX03BD

Отзывы:

Похожие инструкции для LX03BD

Бренды по названию

Популярные бренды