Pioneer LX03BD, Руководство по эксплуатации

Страница: 35 / 132

Listening to your system 05
35
En
English
Français
Deutsch
Nederlands
Italiano
Español
Adjusting the bass and treble
Use the bass and treble controls to adjust the
overall tone.
1 Press to open the sound menu.
2 Select ‘Tone’ then press ENTER.
3 Select ‘Bass/Treble’ then press
ENTER.
• Selecting Bass/Treble cancels the
Midnight and Quiet listening modes. These
modes cannot be used at the same time.
4 Use
/
to select ‘Bass’ or
‘Treble’; use
/
to adjust the sound then
press ENTER to confirm.
• Bass and Treble can be adjusted from
–6dB
to
+6dB
.
• When the Bass or Treble is set to
something other than 0dB , the TONE
indicator lights.
Boosting the bass level
There are two bass modes you can use to
enhance the bass in a source.
1
1 Press to open the sound menu.
2 Select ‘Bass Mode’ then press
ENTER.
3 Select the desired Bass Mode
setting, then press ENTER to confirm.
Select between Off , Music , Cinema or Auto .
• When Bass Mode is set to
Auto
, the
setting (
Music
or
Cinema
) is selected
automatically to optimally match the audio
signal.
• The BASS MODE indicator lights when
Bass Mode is active.
Adjusting sound delay
Some monitors have a slight delay when
showing video, so the soundtrack will be
slightly out of sync with the picture. By adding
a bit of delay, you can adjust the sound to
match the presentation of the video.
There are a total of 60 steps (levels) that you
can adjust, with a total range of 200 msec.
1 Press to open the sound menu.
2 Select ‘Sound Delay’ then press
ENTER.
3 Select the length of the delay in
sound, then press ENTER to confirm.
• This option is deactivated and not
displayed if you have Auto Delay set to
On
in HDMI Setup (see Setting the Auto Delay
on page 51).
Note
1 The Bass Mode is not available when headphones are connected.
SOUND
VIDEO
SELECT
ENTER
ENTER
ENTER
SOUND
VIDEO
SELECT
ENTER
ENTER
SOUND
VIDEO
SELECT
ENTER
ENTER
LX03BD_1.book Page 35 Monday, July 28, 2008 2:12 PM