Additional information
14
50
En
Chapter 14
Additional information
Optional system settings
See the notes in each section for more
information about the settings. The first setting
in each section is the default.
1 Press SHIFT+SETUP and use
/
to
select SYS SET then press ENTER.
2 Use
/
then ENTER to choose the
setting you want to adjust.
The available settings are shown in the front
panel display.
1
3 Use
/
to adjust then press ENTER to
confirm and exit.
Dimming the display
You can adjust the brightness of the text in the
front panel display.
•
LIGHT
– Brighter setting
•
DARK
– Darker setting
Key lock setting
•
LOCK ON
– Makes the front panel buttons
and controls inoperative.
•
LOCK OFF
– Restores regular use of the
front panel buttons and controls.
TV system setting
The default setting of this system is
AUTO
, and
unless you notice that the picture is distorted
when playing some discs, you should leave it
set to
AUTO
. If you find picture distortion with
some discs, set the TV system to match your
country or region’s system. However, this may
restrict the kinds of disc you can watch. See
the table for the kinds of discs compatible with
each setting (
AUTO
,
PAL
and
NTSC
).
2
•
After using
/
to choose TV SYS (step
3 above), press ENTER to change the TV
system as follows:
•
AUTO
NTSC
•
NTSC
PAL
•
PAL
AUTO
•
Press ENTER while CHANGE is blinking.
The system will automatically enter standby
mode, then turn on again. You’ll see the new TV
system setting in the display after seeing
POWER ON
.
Setting the sleep timer
The sleep timer switches off the system after
about an hour so you can fall asleep without
worrying about it.
3
•
Press SHIFT+SLEEP repeatedly to select
an option.
Choose between the following options:
Note
1 The setup menu is exited automatically after 5 minutes of inactivity.
2 Most models of the newly developed countdown PAL TV system detect 50 Hz (PAL)/60 Hz (NTSC) and automatically switch
vertical amplitude, resulting in a display without vertical shrinkage. However, in some cases, the image may appear without
color. If your PAL TV does not have a V-Hold control, you may not be able to watch NTSC discs because of picture roll. If the TV
has a V-Hold control, adjust it until the picture stops rolling. On some TVs, the picture may shrink vertically, leaving black bands
at the top and bottom of the screen.
Player setting
Media Type
Format NTSC
PAL
AUTO
DVD/Super VCD/
Video CD/DivX
Video/WMV
NTSC
NTSC
PAL
NTSC
PAL
NTSC
PAL
PAL
CD/MP3/WMV/
MPEG-4 AAC/
JPEG/no disc
—
NTSC
PAL
NTSC or
PAL
3 The display dims when the sleep timer is set.
DCS-585-590DVD_EN.book 50 ページ ２００９年３月１２日 木曜日 午前１１時２１分
