Listening to your system
05
23
En
English
Français
Deutsch
Nederlands
Italiano
Español
•
MUSIC
(Dolby Pro Logic II Music) – Pro
Logic II 5.1 channel surround sound,
especially suited to music sources (use
with any two-channel source)
•
DOLBY PL
(Dolby Pro Logic) – 4.1 channel
surround sound (use with any two-channel
source)
Each mode shown below is a Pioneer original
sound field mode and is called an “Advanced
Surround” mode.
•
ACTION
– Designed for action movies with
dynamic soundtracks
•
UNPLUGED
– Suitable for acoustic music
sources
•
EXPANDED
– Creates an extra wide stereo
field.
•
TV SURR
– Provides surround sound for
both mono and stereo TV sources.
•
SPORTS
– Suitable for sports programs
•
ADV.GAME
– Suitable for video games
•
X-STEREO
(Extended Stereo)– Gives
multichannel sound to a stereo source,
using all of your speakers.
Dolby Pro Logic II Music settings
When listening in Dolby Pro Logic II Music
mode, there are three settings you can adjust:
Center Width, Dimension, and Panorama.
1 With Dolby Pro Logic II Music mode
active, press SOUND.
2 Use
/
to select C.WIDTH, DIMEN or
PANORAMA then press ENTER.
•
C.WIDTH
(Center Width) – Provides a
better blend of the front speakers by
spreading the center channel between the
front right and left speakers, making it
sound wider (higher settings) or narrower
(lower settings).
•
DIMEN
(Dimension) – Adjusts the depth of
the surround sound balance from front to
back, making the sound more distant
(minus settings), or more forward (positive
settings).
•
PANORAMA
– Extends the front stereo
image to include the surround speakers for
a ‘wraparound’ effect.
3 Use
/
to adjust each setting.
•
C.WIDTH
is adjusted within a range of
0
and
7
.
•
DIMEN
is adjusted within a range of
–3
and
+3
.
• For
PANORAMA
, select from
PNRM OFF
and
PNRM ON
.
4 Press ENTER to confirm.
Using Front Stage Surround
Advance
The Front Stage Surround Advance modes are
effective when you are using the 3spot/2spot
speaker layout as described on page 17.
•
Press SURROUND repeatedly to select a
Front Stage Surround Advance mode.
•
FOCUS5.1
– Use to provide a rich surround
sound effect directed to the center area
where the left and right speakers’ sound
projection converges.
•
WIDE5.1
– Use to provide a surround
sound effect to a wider area than
FOCUS5.1
mode.
•
EXTRAPWR
– Outputs stereo sound (in the
case of multi-channel sources,
down-mixed stereo sound) from the
surround speakers for powerful stereo
effect.
Only for DCS-FS30:
•
FOCUS
– equivalent to
FOCUS5.1
above
•
WIDE
– equivalent to
WIDE5.1
above
DCS-585-590DVD_EN.book 23 ページ ２００９年３月１２日 木曜日 午前１１時２１分
