Other connections
12
46
En
Connecting Optional
Bluetooth
ADAPTER
1 Switch the system into standby and
connect
Bluetooth
ADAPTER to the ADAPTER
PORT located in the rear panel.
For the connection diagram, see 7 on page 42.
2 Press
STANDBY/ON.
3 Press ADAPTER PORT and to switch to BT
AUDIO input mode.
1
Pairing
Bluetooth
ADAPTER and
Bluetooth
wireless technology
device
“Pairing” must be done before you start
playback of
Bluetooth
wireless technology
content using
Bluetooth
ADAPTER. Make sure
to perform pairing first time you operate the
system or any time pairing data is cleared.
“Pairing” is the step necessary to register
Bluetooth
wireless technology device to enable
Bluetooth
communications.
2
For more details,
see also the operating instructions of your
Bluetooth
wireless technology device.
1 Press SHIFT+SETUP to select BT SETUP,
then press ENTER.
2 Use
/
to select PAIRING, then press
ENTER.
3 Select the PIN code to be used from 0000/
1234/8888 using
/
, then press ENTER.
PAIRING
blinks.
CAUTION
• You can use any of 0000/1234/8888 PIN
codes.
Bluetooth
wireless technology
device using any other PIN code cannot be
used with this system.
4 Switch on the
Bluetooth
wireless
technology device that you want to make
pairing, place it near the system and set it
into the pairing mode.
5 Check to see that the
Bluetooth
ADAPTER
is detected by the
Bluetooth
wireless
technology device.
When the
Bluetooth
wireless technology
device detects the
Bluetooth
ADAPTER, the
adapter’s identification “AS-BT100” appears in
the
Bluetooth
wireless technology device list.
3
6 From the
Bluetooth
wireless technology
device list, select
Bluetooth
ADAPTER and
enter the PIN code selected in the step 3.
4
Listening to Music Contents of
Bluetooth
wireless technology
device with Your System
1 Press ADAPTER PORT and to switch to BT
AUDIO input mode.
2 Connect the
Bluetooth
wireless
technology device to the
Bluetooth
ADAPTER.
Note
1 When the
Bluetooth
ADAPTER is not plugged in the
ADAPTER PORT
,
BT AUDIO
input mode cannot be entered even if
ADAPTER PORT
is pressed.
2 • Pairing is required when you first use
Bluetooth
wireless technology device and
Bluetooth
ADAPTER.
• To enable
Bluetooth
communication, pairing should be done with both of your system and
Bluetooth
wireless technology
device.
3 When a
Bluetooth
wireless technology device does not appear in the list of detected devices or has no display, the
Bluetooth
wireless technology device list does not appear. In some cases, you may pair the
Bluetooth
ADAPTER and that
Bluetooth
wireless
technology device by using the pairing mode.
4 PIN code may in some case be referred to as PASSKEY.
DCS-585-590DVD_EN.book 46 ページ 2009年3月12日 木曜日 午前11時21分