“
External storage device (USB, SD)
”
The SD memory card, SDHC memory card
and USB memory device are collectively re-
ferred to as the
“
external storage device (USB,
SD)
”
. If it indicates the USB memory only, it is
referred to as the
“
USB storage device
”
.
“
SD memory card
”
The SD memory card and SDHC memory card
are collectively referred to as the
“
SD memory
card
”
.
“
iPod
”
In this manual, iPod and iPhone will be re-
ferred to as
“
iPod
”
.
Notes on internal memory
Before removing the vehicle
battery
If the battery is disconnected or discharged,
the memory will be erased and must be repro-
grammed.
p
Some of the settings and recorded con-
tents will not be reset.
Data subject to erasure
The information is erased by disconnecting
the yellow lead from the battery (or removing
the battery itself).
p
Some of the settings and recorded con-
tents will not be reset.
Resetting the microprocessor
CAUTION
Pressing the
RESET
button resets settings and re-
corded contents to the factory settings.
p
Do not perform this operation when a device
is connected to this product.
p
Some of the settings and recorded contents
will not be reset.
The microprocessor must be reset under the
following conditions:
!
Prior to using this product for the first time
after installation.
!
If this product fails to operate properly.
!
If there appears to be problems with the op-
eration of the system.
!
If your vehicle position is shown on the
map with a significant positioning error.
1
Turn the ignition switch OFF.
2
Press the RESET button with a pen tip
or other pointed implement.
Settings and recorded contents are reset to
the factory settings.
8100NEX 7100NEX
1
6100NEX 5100NEX
1
1
RESET
button
En
12
Chapter
01
Introduction
Содержание AVIC-5100NEX
Страница 21: ...En 21 Chapter 02 Basic operation Basic operation ...
Страница 262: ...En 262 ...
Страница 263: ...En 263 ...