20
a desired value directly on the numeric keypad or use the cursor keys
to move the cursor on the display and increase or decrease the digit
by turning the knob.
When you use the numeric keypad, all the available units for the entry
will be shown on the display. Press the softkey under the desired unit
to finish the entry, or press Cancel to withdraw the changes.
•
Alphabetical entry-
----If you are asked to enter a string of
alphabetic letters, turn the knob until the desired letter appears on
the display. Use the cursor keys to move the cursor for entering next
letter or modify the letter previously entered. You may also use the
+/- key on keypad to delete the letter previously entered.
3.3 To Select Output Function
G5100A provides various output functionality:
•
Standard waveforms
: G5100A provides five standard
waveforms: sine, square, ramp, pulse and noise. The default
waveform output is sine wave.
•
Arbitrary waveforms
: There are additional five built-in arbitrary
waveforms available. Or you can create your own custom
waveform with Wavepatt software which came with the unit.
•
Modulation
: The waveform generator also provides modulation
for sine, square, ramp and arbitrary waveforms using AM, FM, PM,
or FSK. You can also use PWM to modulate pulse waveform.
•
Frequency sweeping
: Linear and logarithmic frequency
sweeping modes are available for sine, square, ramp and arbitrary
waveforms.
•
Burst operation
: The burst waveforms can be generated with
any one of the standard or arbitrary waveforms (except dc).
Front-panel Operation
To select a desired output function, press the corresponding button and
then set up related parameters as needed. Refer to Chapter 4 for setting
up each individual waveform type.
