Page 4.17
6-CHANNEL BATTERY SIMULATOR MODULE 41-752
pickering
SECTION 4 - PROGRAMMING GUIDE
Settings
You can change settings of the SFP by clicking on
Settings
from the menu
Options
(Figure 4.23).
Figure 4.23 - The Options menu of the SFP with “Settings” selected
Figure 4.24 - The Settings window of the SFP
You can change the Broadcast Echo port, Broadcast Echo timeout, Direct Echo port, etc (Figure 4.24).
Note:
The standard broadcast address is 255.255.255.255, but in some cases this can cause problems. For
example, if you have more than one network interface (physical or virtual), you must specify the broadcast address
of the specified subnet, where you want to discover LXI devices.
Example:
We want to discover LXI devices connected to a class C network where there is a computer with the IP
address 192.168.10.13 and the network’s submask is 255.255.255.0. In this case the correct broadcast address is
192.168.10.255.
