Page 3.3
6-CHANNEL BATTERY SIMULATOR MODULE 41-752
pickering
SECTION 3 - INSTALLATION
SOFT FRONT PANEL INSTALLATION
The installation of the soft front panel utility is through a basic windows install package.
1.
Locate and run the installer package titled ‘41-752 Soft Front Panel Setup.exe’
2.
Follow the on screen instructions, selecting a different target directory if required. It is recommended that it be
installed to the default Pickering directory created during driver installation (usually C:\Pickering).
3.
Once installed a new program group should be available on the ‘Programs > Pickering’ menu location.
This will install the soft front panel utility and the corresponding windows help file.
To un-install, either use the windows Add/Remove Programs procedure or run the ‘Uninstall 41-752 soft front
panel’ menu item in ‘Programs > Pickering > 41-752’
For instructions on how to operate the module via the Soft Front Panel, please refer to Section 4 of this manual
“Programming Guide”.
Figure 3.2 - Soft Front Panel For The Battery Simulator
