Page 4.14
6-CHANNEL BATTERY SIMULATOR MODULE 41-752
pickering
SECTION 4 - PROGRAMMING GUIDE
If the Battery Simulator card has more than one channel, the
Channel selector
box will be visible (Figure 4.16),
which allows you to select the channel (subunit) to be controlled.
Figure 4.16 - The channel selector box of the SFP
Also, for Battery Simulators with multiple channels, the
Global settings
group box (Figure 4.17) allows you to set
all channels simultaneously.
Figure 4.17 - The global settings control of the SFP
Some models of Battery Simulator card support a reset feature. In this case the
Reset Battery Simulator
button
(Figure 4.18) is enabled.
Figure 4.18 - The Reset Battery Simulator button
At the bottom of the control window are two additional buttons:
Information
and
Status
(Figure 4.19). Click on the
Information
button to obtain information about the card currently being controlled by the SFP (Figure 4.20). Next
to the Information button is the
Status
button and a status display. To refresh the status display for the card simply
click on the
Status
button.
Figure 4.19 - The bottom part of the SFP
Figure 4.20 - The information window showing the card currently controlled by the SFP,
in this case, a 41-753-001 Multiple Battery Simulator
