PI Manufacturing DVR-TVI-04, Руководство пользователя

Страница: 50 / 165

Digital Video Recorder User Manual
49
5.1 Configuring Encoding Parameters
Before you start:
1. Make sure that the HDD has already been installed. If not, please install a HDD and initialize it.
(Menu>HDD>General)
Figure 5. 1 HDD- General
2. Click Advanced tab to check the storage mode of the HDD. (Menu>HDD>Advanced)
1) If the HDD mode is Quota , please set the maximum record capacity. For detailed information, see
Chapter 13.4 Configuring Quota Mode .
2) If the HDD mode is Group , you should set the HDD group. For detailed information, see Chapter 5.10
Configuring HDD .
Figure 5. 2 HDD- Advanced
Steps:
1. Enter the Record Parameters interface to configure the encoding parameters.
Menu>Record>Parameters
Figure 5. 3 Record Parameters
2. Set the parameters for recording.
1) Select the Record tab to configure.
2) Select a camera from the camera dropdown list.
3) Configure the following parameters for the Main Stream (Continuous) and the Main Stream (Event) :
Stream Type : Set the stream type to be Video or Video & Audio.
Resolution: Set recording at resolution.
Bitrate Type: Set the bitrate type to be Variable or Constant.
Video Quality: Set the video quality of recording, with 6 levels configurable.
The Stream Type, Resolution, Bitrate Type and Video Quality are not configurable for the Main
Stream (Event) of the IP Camera.
Frame Rate: Set the frame rate of recording.
Max. Bitrate Mode: Set the mode to General or Custom (32-6144Kbps).
Max Bitrate (Kbps): Select or customize the maximum bit rate for recording.
Max. Bitrate Range Recommended: A recommended max. bit rate range is provided for reference.
Max. Average Bitrate (Kbps): Set the max. average bit rate which refers to the average amount of
data transferred per unit of time.
3. Check the checkbox of Enable H.264+ to enable this function. Enabling it helps to ensure the high video