PI Manufacturing DVR-TVI-04, Руководство пользователя

Страница: 35 / 165

Digital Video Recorder User Manual
34
Figure 3. 1 Right-click Menu
3.2.2 Main/Aux Output Switching
l
When the HDMI/VGA output is configured as the main output, you can perform the following operation to
switch to CVBS output as the main output.
Steps:
1. Use the mouse wheel to double-click on the HDMI/VGA output screen, and the following message box pops
up:
Figure 3. 2 Switch Main and Aux Output
2. Use the mouse wheel to double-click on the screen again to switch to the Aux output, or click Cancel to
cancel the operation.
3. Select the Menu Output Mode to Main CVBS from the right-click menu on the monitor.
4. On the pop-up message box, click Yes to restart the device to enable the CVBS output as the main output.
You can select the Menu Output Mode under Menu>Configuration>General>More Settings to Auto , or
HDMI/VGA and then restart the device to switch the main output back to HDMI/VGA output.
3.2.3 Quick Setting Toolbar in Live View Mode
On the screen of each channel, there is a quick setting toolbar which shows when you click the screen.
Figure 3. 3 Quick Setting Toolbar
You can refer to Table 3.4 for the description of Quick Setting Toolbar icons.
Table 3. 4
Description of Quick Setting Toolbar Icons
Icons Description Icons Description Icons Description
Enable/Disable
Manual Record
Instant Playback Mute/Audio on
PTZ Control Digital Zoom Image Settings
Close Live View
Instant Playback only shows the record in last five minutes. If no record is found, it means there is no record
during the last five minutes.
Digital Zoom can zoom in the selected area to the full screen. Click and draw to select the area to zoom in, as
shown in Figure 3. 4.