Physiomed HIVAMAT 200, Руководство по эксплуатации

Страница: 10 / 27

2.1.6 Intensity Control <6>
The intensity control <6> serves for adjusting the massage intensity
as desired. It refers to the intensity display <7> . Allocated to the
control is the turn-down indicator <8> , which lights up whenever
the intensity control <6> is to be turned down to zero. The timer
starts running with regulation of the intensity control <6> .
2.1.7 Intensity Display <7>
The intensity display <7> shows the massage intensity selected (in
% of the maximum value).
2.1.8 Turn-Down Indicator <8>
The turn-down indicator <8> is allocated next to the intensity con-
trol <6> . It flashes whenever the intensity control <6> should be
turned to zero. This is the case following self-test routine, after time
has elapsed and when attempting to extend massage duration with
the intensity turned high.
2.1.9 Connector Sockets <9>
The connector sockets <9> serve for connecting the spiral leads. For
instructions how to connect the spiral leads refer to section Prepara-
tions and Attachment on page 13.
The symbols below the connector sockets <9> have the following significance:
The patient lead is not connected to the protective ground wire for maximum pro-
tection of the patient (the equipment is protection class I, type BF).
Please consider the physiological effects when applying vibration induced by electro-
static fields to the patient!
PHYSIOMED ELEKTROMEDIZIN AG
2 Controls and Indicators
6 HIVAMAT
®
200