Chapter 2 Controls and Indicators
The design of HIVAMAT
®
200 allows for easy operation, in combination with a variety of functions. Due to
its compact size, the instrument is very easy to transport. It has been designed for operation also outside
of therapy rooms, and can be fed by rechargeable batteries for that reason.
All controls and indicators are integrated into the housing, thus allowing for easy cleaning of the instru-
ment's surface and protecting it from dust.
The instrument's microprocessor monitors the safety-related components, prevents from erroneous opera-
tion and checks the instrument after switching it on.
2.1 Function of Controls and Indicators
The following section introduces the individual indicators and controls of HIVAMAT
®
200. The numbers in
angle brackets refer to the
on page 2.
2.1.1 Mains Module <1>
The
mains module <1>
with mains supply, fuses and mains switch is
situated at the rear side of the instrument. The
mains module <1>
allows for mains voltages from 110 to 240 VAC. HIVAMAT
®
200 is
switched on and off using the integrated mains switch. After switch-
ing on, the instrument is in stand-by mode.
CAUTION
Always ensure that the mains voltage matches 110 ... 240 VAC, 50 ... 60 Hz (refer to
on page 17).
2.1.2 Massage Key <2>
The
massage key <2>
turns on the power supply for the instrument
when it is in stand-by mode. As soon as the
massage key <2>
has
been pressed, an automatic self-test routine is performed by the in-
strument (refer to
on page 10). After that, the instru-
ment is ready for use.
PHYSIOMED ELEKTROMEDIZIN AG
2 Controls and Indicators
4
HIVAMAT
®
200
