Title
LIFEPAK 15 Monitor Defibrillator CO2 Upgrade
Page
2 of 33
Doc Type
Service Process Document
Doc ID
3308217
Doc Rev
A
Doc State
Released
State Date
09/08/2011
Purpose:
This instruction guides the Field Service Representative through the update process to add the CO2 feature to a LIFEPAK® 15
monitor/defibrillator.
Scope:
This upgrade is for 3206720-All (Version 1) and 3306272-All (Version 2) LIFEPAK 15 monitor/defibrillators that do not have the End-Tidal
Carbon Dioxide (CO
2
) monitoring feature installed.
These instructions are intended for authorized field service personnel who have reviewed the upgrade procedure and who are familiar with
the LIFEPAK 15 device.
Training:
As a prerequisite, only personnel that have completed LIFEPAK 15 monitor/defibrillator repair training are allowed to perform this upgrade
on a LIFEPAK 15 device. An individual will be considered fully trained when they meet the prerequisite, and read and understand this
document. Once this task is performed the individual has completed training. A documented training record will be retained.
Tools Required: (substitute of equivalent or better equipment allowed)
Computer
– XP operating system
LIFEPAK 15 To PC Interconnect Cable 3009817-00 or 3009817-002
Torque Driver
– Hand Operation, with an adjustable range of 5–12 in-lb.
Torque Driver
– Hand Operation, with an adjustable range of 32–64 in-oz.
Driver Bits
– P0 (2” minimum shaft), P1 (2” minimum shaft), P2 (5” minimum shaft), Torx, T-15 (2” minimum shaft)
Tools called out in the PIP - TCP sections of LIFEPAK 15 Monitor/Defibrillator PIP Test Procedure
All tools requiring calibration should be calibrated and within their calibration cycle dates.
Torque Driver conversions
–
2 lb-in
= 32 in-oz = 22.5 cNm,
4 lb-in
= 64 in-oz = 45 cNm,
6.8 lb-in
= 77cNm,
10 lb-in
= 113 cNm
Documentation Required:
Instructions
– Installation, Software, Combined Loader P/N 3206073 revision N or greater
LIFEPAK 15 PIP/TCP Procedure
P/N 3207841 revision D or greater
LIFEPAK 15 Service Manual, CD
P/N 3208091-000 (V1) or 3309059-000 (V1/V2)
Work Instructions
– CAPIP Test
P/N 3301593.C or greater
