Photon Focus MV1-D2048-3D06 series, Руководство пользователя

Страница: 68 / 127

5 Functionality
Edge Triggered Trigger Acquisition
The Edge Triggered mode is enabled by setting
TriggerAcquisition_Mode
to
Edge
and
TriggerAcquisition_Enable
=
True
. Two signals act as trigger enable (see Fig. 5.32). A rising edge
on the start signal enables triggering. A rising edge on the stop signal disables all triggers. The
start/stop signals are selected by
TriggerAcquisition_StartSource and
TriggerAcquisition_StopSource .
T r i g g e r A c q u i s i t i o n _ S t a r t
T r i g g e r I n
A p p l i e d T r i g g e r
T r i g g e r A c q u i s i t i o n _ S t o p
I n t e r n a l T r i g g e r E n a b l e
d i s a b l e d e n a b l e d d i s a b l e d
Figure 5.32: Trigger Acquisition Level triggered (TriggerAcquisition_Mode = Edge)
Trigger Acquisition and Free-Running Trigger
The TriggerAcquisition feature can also be used with free-running trigger ( TriggerMode = Off ).
TriggerAcquisition enables or disables in this case the generation of the free-running trigger.
5.4.12 Strobe Output
The strobe output is an isolated output located on the power supply connector that can be
used to trigger a strobe. The strobe output can be used both in free-running and in trigger
mode. There is a programmable delay available to adjust the strobe pulse to your application.
The strobe output needs a separate power supply. Please see Section 7.6, Fig.
5.19 and Fig. 5.20 for more information.
68 of 127 MAN075 05/2017 V1.0