Philips FW-D5/21, Руководство по обслуживанию

Страница: 21 / 100

PCS 103 812
2-15
35
English
Note:
– For 'EASY SET' feature, please refer to
page 14.
Tuning to radio stations
1 Press TUNER (BAND) to select TUNER
mode.
™
"
TUNER
" will be displayed.
A few seconds later, the current radio
frequency will be displayed.
2 Press TUNER (BAND) again to select
the desired waveband : FM or MW.
3 Press
à
or
á
for more than one
second, then release.
™
The display will show "
SEARCH
"
until a radio station with sufficient
signal strength is found.
• Repeat this procedure until the desired
radio station is reached.
• To tune to a weak radio station, briefly
press
à
or
á
repeatedly until the
display shows the desired frequency
and/or when the best reception has
been obtained.
TUNER
Storing Preset Stations
You can store up to 40 radio stations in the
memory. When a preset radio station is
selected, the preset number appears next
to the frequency on the display.
Automatic programming
1
Press TUNER (BAND).
2 Press PROG for more than one second.
™
The
PROG
starts flashing and "
AUTO
"
will be displayed.
™
The system will search for every
available radio station in the FM
waveband first, then search the MW
waveband.
™
All available radio stations will be
stored automatically. The frequency
and preset number will be displayed
briefly.
™
The system will stop searching when
all the available radio stations are
stored or when the memory for 40
preset radio stations is used.
™
The system will remain tuned to the
last stored preset radio station.
Notes:
– You can cancel the automatic
programming by pressing PROG or
Ç
(on the system only).
– If you want to reserve a section of
preset numbers, for example preset
numbers 1 to 9, select preset 10 before
starting automatic programming, only
the preset numbers 10 to 40 will be
programmed.
Manual programming
1
Press TUNER (BAND).
2 Press TUNER (BAND) again to select
the desired waveband : FM or MW.
3 Press PROG for less than one second.
™
The
PROG
starts flashing.
™
The next available preset number will
be displayed for selection.
4 Press
à
or
á
to tune to the desired
frequency.
• If you wish to store the radio station to
another preset number, press
í
or
ë
(or Digit 0-9 on the remote control) to
select the desired preset number.
5 Press PROG again.
™
The
PROG
disappears and the radio
station will be stored.
• Repeat steps 3 – 5 to store other preset
radio stations.
Notes:
– When 40 radio stations are stored and
you attempt to store another radio
station, the display will show
"
PROGRAM FULL
". If you want to
change an existing preset number,
repeat steps 3 – 5.
RETU
RN
PERSONAL
V
EC
DS
C
D
B
B
STANDBY
ON
DVD MINI HIFI SYSTEM
DIM PROG
POWER SAVE
IR SENSOR
RDS / CD TEXT
NEWS / T.A.
CLOCK/
TIMER
VOLUME
AXIS OK
DVD
MENU
SOUND JOG DVD JOG
P3 P6 P1 P2 P5 P4
CHAP. SLEEP DIM TIMER LW FM A M W
TUNER DVD CD AUX
A
-
B
PB
C
BAND VCD • CD CD 1 • 2 • 3 CDR
LEFT CENTER RIGHT
SURR SURR
STOP•CLEAR SEARCH• TUNING PLAY PAUSE
PREV NEXT SIDE
PRESET
▲
▲
S
C
A
N
CHANNEL
DVD
SURROUND CONTROL
5.1CH / STEREO / SURR / 3D
FTS TITLE
36
English
TUNER
.
– You can cancel manual programming by
pressing
Ç
(on the system only).
– During programming, if no button is
pressed within 20 seconds, the system
will exit programme mode
automatically.
Tuning to Preset Radio
Stations
• Press
í
or
ë
(or Digit 0-9 on the
remote control) to select the desired
preset number.
™
The preset number, radio frequency,
and waveband appear on the display.
Changing the MW tuning grid
(not available for all versions)
The frequency step can be changed if
necessary. In North and South America, the
frequency step between adjacent channels
in the MW band is 10 kHz. In other parts of
the world, it is 9 kHz. The frequency step
presetted in the factory is 9 kHz.
For MW band
To change from 9 kHz to 10 kHz or vice
versa
Changing of tuning grid will erase all
previously stored preset stations.
1 Disconnect the system from the AC
power supply
(pull out the AC power
cord).
2 Press TUNER and TUNING
á
depressed while reconnecting the
system to the AC power supply.
™
Display will show "
GRID 9
" or
"
GRID 10
".
Notes:
– GRID 9 indicates that the tuning grid is
in step of 9 kHz in MW band. GRID 10
indicates that the tuning grid is in step
of 10 kHz in MW band.
– FM tuning grid will also be changed
from 50 kHz to 100 kHz or vice versa.
All preset radio stations will also be
erased.